Buy Kriss Vector SRB

Buy Kriss Vector SRB

The Kriss Vector for sale series are a family of weapons based upon the parent submachine gun. The design developed by the American company Kriss USA, formerly Transformational Defense Industries (TDI). They use an unconventional delayed blowback system. This, combined with in-line design to reduce perceived recoil and muzzle climb.

KRISS Vector G2 SDP-E Pistol 45 ACP 6.5″ Black KV45-PBL30

Also, the Vector family has undergone two generations of modification. The Gen I version is the baseline model of the Vector family. Thus it was later replaced by the improved Gen II version. This kriss vector for sale gen II features a redesigned pistol grip and trigger.

Also, it has the swing angle of the safety lever reduced from 120 to 45 degrees. It also eliminates the opening above the barrel for the original weapon’s optional Surefire weapon light. They no longer manufacture these. In addition to the original Flat Black finish, optional factory Cerakote coatings now come in Olive Drab (green), Flat Dark Earth (tan), Alpine (white), or Combat Gray.

Buy Kriss Vector SRB

The kriss Vector for sale uses an articulated mechanism referred to as the “Kriss Super V,”. This allows the bolt and an inertia block to move downward into a recess behind the magazine well. The theory is that at the end of this travel, the energy is transmitted downward rather than rearward. Thus reducing the felt recoil. When fired, the barrel axis is in line with the shoulder as in the M16 rifle,

but also in line with the shooter’s hand. This helps to reduce muzzle climb when combined with the off-axis bolt travel. This it also greatly raises the sight line in comparison to the bore axis.

Furthermore, the initial prototype model by TDI achieved a rate of fire of 1,500 rounds per minute (RPM). But they brought this down to around 1,200 rounds per minute (RPM) on the production models.

Buy Kriss Vector SRB

The Kriss Vector for sale is split into two major assemblies in a similar manner to the AR-15 rifle, secured together with four push pins. Due to the weapon’s unusual layout, the lower contains the action, charging handle, magazine well and barrel. Meanwhile the upper contains the ejection port, rail system, pistol grip and fire control components, as well as the stock for configurations that have one.

This modular design of the kriss vector for sale allows for toolless caliber conversions. Done by swapping out only the lower. The Vector’s safety is ambidextrous (as well as the fire mode selector on the auto trigger pack). Meanwhile the ejection port, charging handle, bolt release catch and magazine releases are not.(Instead, they are only available in a right-handed configuration. Kriss Vector SRB

The KRISS Vector CRB is the most generally available model, including a rifle-length barrel that is compatible in 47 states. The Vector CRB is an excellent choice for both recreational and competitive pistol caliber carbine shooting. The CRB, like all KRISS Vector weapons, uses full-size Glock® magazines, providing for a variety of large-capacity alternatives.

The Super V System, a nonlinear, multilink blowback system meant to channel recoil energy down, lies at the heart of the Vector CRB. The Super V System, along with the low bore axis, reduces muzzle ascent and felt recoil.

Buy Kriss Vector SRB

The CRB, like all KRISS Vector weapons, uses full-size Glock® magazines, providing for a variety of large-capacity alternatives. The Super V System, a nonlinear, multilink blowback system meant to channel recoil energy down, lies at the heart of the Vector SDP. The Super V System, along with the low bore axis, reduces muzzle ascent and felt recoil.

Recoil Mitigation System Super V Compatibility with Glock® magazines Axis of low bore Flip sights with a low profile Picatinny top rail, full length Stock Kydex grip wrap has been fixed.

Overall Length: 36.38 in / 923.9 mm Operating System: 10 Barrel Length: 16.0′′ Barrel Length: 16.0′′ Overall Length: 36.38 in / 923.9 mm
Type of action: Closed Bolt, Delayed Blowback

Stocks that are semi-automated
BLACK is the standard stock color. Weight: 3.6 kg / 8.0 lb

SDP-E G2 KRISS VECTOR SDP ENHANCED KRISS VECTOR 6.5 “BLACK 9MM PISTOL 15RD GLOCK MAGS 811607033663 KV90PBL30 KV90-PBL30 MWS BARREL THREADED WITH SBA3 BRACE (BRACE

INSTALLED BY US) SDP-E G2 KRISS VECTOR SDP ENHANCED KRISS VECTOR 6.5 “10MM BLACK BRACE WITH
KRISS VECTOR SDP-E KRISS VECTOR SDP ENHANCED 10MM KRISS VECTOR SDP ENHANCED

Buy Kriss Vector SRB

The KRISS Vector GEN II is the latest generation of the Vector platform, transforming it from a single-caliber pistol to a multi-caliber weapon system that uses the popular Glock.magazine. Without the use of any tools, switching between calibers can be done in seconds. With a revised trigger, a short throw ambidextrous safety lever, and a more comfortable pistol grip, the KRISS Vector GEN II is more ergonomic.

The KRISS Vector SBR is an NFA-regulated short barrel rifle with a 5.5″ barrel for suppressor mounting. The fixed KRISS M4 type stock has a large range of adjustment to accommodate any user. The flip sights and full length picatinny top are also standard on the KRISS Vector SBR.

Patented KRISS Super V Recoil Mitigation System.
Glock™ magazine compatible.
Smooth trigger with audible and tactile reset.
Tool-less caliber interchangeability.

Ambidextrous short throw safety lever.
Full Length MIL-STD 1913 Picatinny top rail.
MIL-STD 1913 Picatinny bottom rail.
Low profile folding sights.
KRISS M4 Stock Adaptor with DEFIANCE® M4 Stock 4-pin.
Toolless disassembly.
Threaded barrel. 1/2 x 28 RH

Buy Kriss Vector SRB

The KRISS Vector SBR Enhanced is the Vector SBR’s most versatile version. More picatinny rail space for attachments has been added with the inclusion of the MK5 Modular Rail. The KRISS.Ambidextrous Folding Stock, located at the rear of the receiver, reduces the total length of the Vector SBR Enhanced by more than nine inches when folded.

The Super V System, a nonlinear, multilink blowback system meant to channel recoil energy down, is at the heart of the Vector SBR Enhanced. The Super V System, along with the low bore axis, reduces muzzle ascent and felt recoil. The SBR Enhanced, like all KRISS Vector weapons, is fed by full-size Glock® magazines, allowing for ammo cross compatibility.

It’s a somewhat smaller version of the Vector, but it’s still powered by the same Super V technology. The main difference is a redesigned lower receiver for easy caliber interchangeability; by mounting alternative lower receivers, users can switch between 9x19mm,.40 S&W, and.45 ACP with just a single takedown pin.

The charging handle was also redesigned, now traveling diagonally, almost vertically, and may be installed on either side of the weapon.

A new telescoping stock, rather than a folding one, and a four-sided accessory rail tube around the barrel were further noticeable differences.
In 2015, Kriss released “Gen II” copies of the original Vector models. These have this property.

Kriss Vector SRB

These have a new pistol grip, trigger, and safety selector, as well as being compatible with a new 9x19mm lower. These appear to be the replacements for the K10 prototypes, albeit none of the K10’s characteristics were carried over. The Vector employs a “Kriss Super V” articulated system that permits the bolt and an inertia block to travel downward into a recess behind the magazine well.

 According to the hypothesis, the energy is sent downward rather than backward at the end of this journey, lessening the sensation of recoil. When fired, the barrel axis is aligned with the shooter’s hand as well as the shoulder, like with the M16 rifle. When paired with the other features, this is supposed to reduce muzzle climb.

Buy Kriss Vector SRB

When paired with off-axis bolt travel, this is supposed to lessen muzzle climb, however it also lifts the sight line much above the bore axis. The early TDI prototype model fired at a rate of 1,500 rounds per minute, though this was reduced to roughly 1,200 rounds per minute in production units. Civilian models are only available in semi-automatic versions.

In the same way that the AR-15 rifle is separated into two major parts, the Vector is fastened together with four push pins. Due to the weapon’s odd layout, the action, charging handle, magazine well, and barrel are located on the lower, while the ejection port, rail system, pistol grip, and fir are located on the upper.

Components for the pistol grip and firing control, as well as the stock in stock versions. By swapping out merely the bottom, this modular design enables for toolless caliber conversions. The Vector’s safety (along with the auto trigger pack’s fire mode selector) is ambidextrous, but the ejection port, charging handle, bolt release catch, and magazine release are not, and are only available in a right-handed configuration.

Buy Kriss Vector SRB

When the gun was first released, calibers like.22 LR,.40 S&W, and 919mm Parabellum were mentioned. At SHOT Show 2015, the Gen II variants with several design improvements, including a new 9mm model, were confirmed, while the.22LR version has yet to arrive.

Standard Glock 21 handgun magazines are compatible with Vectors chambered in.45 ACP. A special “MagEx 30″[10] kit was available to upgrade a factory 13-round.45 ACP Glock magazine to a high-capacity extended version, however it was later sold as a “25+” round kit. [3] Glock 17 magazines are used with Vectors chambered in 9mm Parabellum.

KRISS released the “MagEx2” in 2019, which increases the capacity of a normal Glock magazine. The MagEx 2 is offered in 9mm with a total capacity of 40 rounds, 10mm with 33 rounds, and.45 ACP with 30 rounds.

Kriss Vector SRB

The KRISS Vector has gone through two generations of changes. The Vector family’s baseline model is the Gen I version. It was eventually replaced with the upgraded Gen II version, which includes a modified pistol grip and trigger, as well as a 45-degree swing angle for the safety lever. It also takes away the aperture above the barrel for the original weapon’s optional Surefire weapon light, which is no longer available.

Optional factory Cerakote coatings are now available in Olive Drab (green), Flat Dark Earth (tan), Alpine (white), and Combat Gray, in addition to the standard Flat Black finish.

Only military and law enforcement personnel can use the Vector SMG version. It has a 5.5-inch barrel (with a 6.5-inch barrel option on the Gen II version), a folding stock, Midwest Industries back-up iron sights (BUIS) (MagPul MBUS on Gen II weapons), a full-length Picatinny rail for mounting various optics/scopes, and either a two-mode (single and full-auto) or a three-mode (single and full-auto) fire selector (single, two-round burst and full-auto).

Buy Kriss Vector SRB

It is only available as a complete weapon in.45 ACP and 919mm Parabellum, while the auto trigger pack is compatible with any Vector lower owing to the design of the weapon. Glock 17-compatible magazines (usually the Glock 17) are used in the 9mm variant.

For the civilian market in the United States, semi-automatic models are manufactured and accessible. The Vector CRB, Vector SBR, and Vector SDP are the three major configurations. They can be chambered in.40 S&W (using Glock 22 magazines), 10mm Auto (using Glock 20 magazines), or.357 SIG in addition to 919mm Parabellum and.45 ACP (using Glock 31 magazines).

For the Italian civilian market, a 921mm IMI model is available, which uses normal 919mm Glock 17 magazines. The.22 LR version uses a customized 10-round magazine and a typical straight blowback operating method instead of the Super V delayed system.